ranroswang@hksparkling.com 
+86 138 2341 8469
KHR44570 KHR24470 Converter for Case CX130C/CX160C/CX210D & Sumitomo SH120-A2 | SPARKLING MACHINERY
- How does a torque converter affect excavator performance?
- What is the functional role of the converter in hydraulic drive systems?
- How does converter wear manifest on Case and Sumitomo excavators?
- Why is a precision-balanced replacement important?
- What makes SPARKLING’s converter a reliable excavator parts choice?
- How does SPARKLING ensure component-level quality control?
- What compatibility and fitment checks are performed?
- Why is aftermarket selection cost-effective for fleet operators?
- How to select, install, and maintain the converter to reduce downtime?
- How should technicians verify before installation?
- What are best practices for installation to ensure longevity?
- How should ongoing maintenance be scheduled for optimal performance?
- FAQ
Upgrade fleet reliability with the high-precision KHR44570 KHR24470 converter, an engineered torque-converter replacement for Case CX130C, CX160C, CX210D and Sumitomo SH120-A2 excavators that restores smooth power transfer, reduces slippage, and minimizes costly downtime—backed by SPARKLING MACHINERY’s 2013-established quality controls and global supply chain for top-tier excavator parts.
How does a torque converter affect excavator performance?
What is the functional role of the converter in hydraulic drive systems?
The torque converter transmits engine torque to the hydraulic pump and undercarriage travel systems, smoothing load spikes and allowing controlled creep-speeds during digging. For operators of excavator parts fleets, a correctly matched converter prevents torque losses and keeps hydraulic pressures within designed ranges to protect pumps and final drives.
How does converter wear manifest on Case and Sumitomo excavators?
Wear typically appears as increased slippage, poor acceleration, overheating, and slow hydraulic response—symptoms that reduce productivity and increase fuel consumption. Early diagnosis through pressure tests and vibration analysis isolates converter faults before secondary damage occurs to pumps, valves, or engines.
Why is a precision-balanced replacement important?
Precision balancing reduces vibration and uneven torque transfer that accelerate bearing and shaft wear. Using balanced components designed for Case and Sumitomo tolerances extends service intervals and keeps other excavator parts operating within safe load envelopes, reducing unplanned maintenance.
What makes SPARKLING’s converter a reliable excavator parts choice?
How does SPARKLING ensure component-level quality control?
SPARKLING applies multi-stage inspections—material verification, CNC machining tolerances, dynamic balance testing, and final hydraulic bench testing—to meet strict performance criteria. These processes reduce field failures and ensure each converter performs like an OEM-matched unit in demanding jobsite conditions.
What compatibility and fitment checks are performed?
Fitment validation includes flange dimensions, spline counts, and torque ratios checked against Case CX and Sumitomo factory specifications. SPARKLING’s engineering team cross-references service manuals and conducts trial fits to guarantee that this excavator parts converter mates correctly with existing drivetrains.
Why is aftermarket selection cost-effective for fleet operators?
Aftermarket options from vetted manufacturers provide OEM-equivalent performance at lower unit cost and faster availability, reducing total cost of ownership for excavator parts fleets. SPARKLING leverages efficient manufacturing and a global network to lower procurement lead times without sacrificing quality.
How to select, install, and maintain the converter to reduce downtime?
How should technicians verify before installation?
Technicians must confirm machine model, serial numbers, bolt patterns, and hydraulic line routing against the replacement unit. A pre-install checklist that includes drain and flush of hydraulic fluids, inspection of coupling hardware, and alignment verification prevents contamination-related failures common to excavator parts replacements.
What are best practices for installation to ensure longevity?
Use manufacturer torque specs, clean mating surfaces, and replace gaskets and seals to factory standards. After installation, perform controlled break-in procedures under load to seat internal components and confirm pressure/temperature stability—this protects the converter and associated excavator parts from premature wear.
How should ongoing maintenance be scheduled for optimal performance?
Schedule fluid analysis, filter changes, and vibration checks at regular intervals aligned to operating hours and jobsite conditions. Proactive monitoring of hydraulic cleanliness and operating temperatures maintains efficiency and prevents failures that cascade across excavator parts.
Technical resources and industry guidance are useful when evaluating parts: Excavator - Wikipedia provides machine context, International Organization for Standardization (ISO) outlines quality frameworks applicable to component manufacturing, and SAE International offers standards and technical papers for fluid power and driveline systems.
SPARKLING MACHINERY combines strict manufacturing control with aftermarket adaptability across the excavator parts range—hydraulic components, undercarriage systems, engine and electrical components, cabs, and mini excavators—supporting global fleets with technical advice, custom solutions, and competitive pricing to lower operating costs and improve uptime.
For technical inquiries, engineering drawings, or procurement quotes on torque converters and related excavator parts, contact our sales engineers for tailored solutions and rapid lead times.
FAQ
What machines is the KHR44570 KHR24470 converter compatible with?
It is compatible with Case CX130C, CX160C, CX210D and Sumitomo SH120-A2 excavators as a direct-fit replacement. The converter matches flange and spline dimensions for those models, enabling straightforward swaps without extensive drivetrain modification when proper fitment checks are performed.
What warranty and post-sale support does SPARKLING provide?
SPARKLING offers a 12-month limited warranty covering manufacturing defects and material failures. The warranty is backed by technical support for installation guidance and troubleshooting, with access to engineering consultation and replacement logistics where applicable.
How long is the typical lead time for orders and shipping?
Standard lead time ranges from 7 to 21 days depending on stock status and destination, with expedited options available for urgent fleet needs. Transit times vary by region; SPARKLING’s logistics partners provide tracking and estimated delivery windows upon order confirmation.
What quality standards and testing are applied to this converter?
Components undergo material verification, CNC machining tolerance checks, dynamic balance testing, and hydraulic bench runs to validate performance. SPARKLING aligns manufacturing practices with ISO quality management principles and consults SAE technical guidance for fluid power and driveline integrity.
Can the converter be installed onsite or does it require a workshop?
Minor fitments can be performed onsite by experienced technicians, but full installation with alignment, torque verification, and hydraulic bench testing is recommended in a workshop. A controlled environment ensures proper sealing, fluid flushing, and functional testing to protect the entire drivetrain.
What is the expected service life and maintenance interval for this converter?
Service life depends on operating conditions, but typical replacement intervals range from 2,000 to 5,000 operating hours under heavy use. Regular hydraulic fluid analysis, filter replacement, and vibration checks every 250–500 hours will maximize lifespan and prevent early failures.
SPARKLING MACHINERY NEW EC140 VOE14778022 Compressor is a premium China-made climate control component specifically engineered for EC140 excavators. As a key part of the cabin cooling system, it compresses refrigerant to maintain optimal temperature regulation, ensuring operator comfort and productivity in extreme weather conditions—from scorching construction sites to humid industrial zones.
Designed to original equipment standards, it delivers consistent cooling performance with stable pressure output even under prolonged operation. With optimized structural design for minimal vibration and energy consumption, it integrates seamlessly into the EC140’s existing climate system. Backed by strict quality verification, it guarantees reliable operation to support uninterrupted work cycles in harsh environments.
SPARKLING MACHINERY NEW E336GC 511-7558 Fan; Cooler is a dedicated thermal management component for Caterpillar E336GC crawler excavators (heavy-duty equipment for mining, large-scale construction, and infrastructure projects). As a core part of the excavator’s cooling system, it works with the radiator to enhance airflow, accelerating heat dissipation from engine coolant and hydraulic oil—ensuring stable operating temperatures during high-intensity tasks like rock breaking, bulk ore loading, and continuous digging.
Meeting Caterpillar OEM standards (part no. 511-7558), it endures -30°C to 105°C temperatures, resists dust buildup and vibration, and maintains consistent airflow. Strict testing guarantees seamless compatibility and long-term reliable cooling performance for the Caterpillar E336GC.
SPARKLING MACHINERY NEW 4130015120001 Fan is a critical cooling system component tailored for compatible heavy-duty construction machinery, such as excavators and loaders. As a core part of the machinery’s heat dissipation system, it works with the radiator to accelerate air flow over the cooling core—effectively removing excess heat from engine coolant, hydraulic oil, or transmission fluid during high-intensity operations like digging, heavy-load lifting, and continuous idling. This function is vital for maintaining the machinery’s key systems within safe temperature ranges, preventing overheating-induced power loss, component damage, or unexpected shutdowns that disrupt construction, mining, or infrastructure projects.
Engineered to match original equipment performance standards, it maintains stable air flow rate and structural integrity even under harsh working conditions, including high ambient temperatures (up to 45°C), continuous machinery vibration, and exposure to dust, debris, or rain. It resists blade deformation and motor failure (for electric variants), avoiding cooling inefficiencies that lead to costly downtime. Backed by strict performance verification, it guarantees reliable heat management to support uninterrupted operation of compatible heavy-duty machinery.
SPARKLING MACHINERY NEW B877F B876F 4110002287 Fan is a dedicated, high-efficiency cooling component exclusively engineered for SDLG B877F and B876F crawler excavators—versatile mid-to-large equipment widely used in construction, quarrying, and infrastructure maintenance projects. As a core part of the excavator’s cooling system, it accelerates heat dissipation for critical components (engine, hydraulic oil, and coolant), ensuring stable operating temperatures even during high-intensity tasks like rock breaking, bulk aggregate loading, and prolonged deep excavation. This function is vital for preventing overheating-related failures, maintaining consistent engine and hydraulic efficiency, and avoiding unplanned downtime that disrupts daily project workflows.
Engineered to meet SDLG’s original equipment (OEM) standards and marked with the genuine part number 4110002287, the fan withstands harsh working conditions: high rotational speeds (up to 2,700 RPM), extreme temperature fluctuations (-25°C to 110°C), and continuous vibration from heavy-duty use. It resists dust accumulation, corrosion, and mechanical wear, providing long-lasting cooling reliability for the two SDLG excavator models. Backed by strict performance verification, it guarantees seamless compatibility and safe operation for daily excavator tasks.
Contact us
Email: ranroswang@hksparkling.com
Wechat: +86 136 0901 0879
Skype: foreverlucia1
WhatsApp: +86 136 0901 0879
Address: No. 514-515, Hulin Road, Tianhe District, Guangzhou, China.
Sparkling Machinery Co.,Ltd
sparkling_machinery
Whatsapp: +8613609010879