VOE11713138 Diesel Fuel Filter Base Housing for Volvo EC210B, L120E
The VOE11713138 Primary Fuel Filter Housing and Base Assembly is a high-reliability fuel system component engineered specifically for Volvo B-Series crawler excavators, E-Series wheel loaders, and backhoe loaders.
Compatible Models
· Volvo Crawler Excavators: EC135B, EC140B, EC160B, EC180B, EC210B, EC210C, EC240B, EC290B, EC330B, EC360B, EC460B, etc.
· Volvo Wheeled Excavators: EW140B, EW140D, EW145B, EW160B, EW180B, EW200B
· Volvo Wheel Loaders: L50E, L60E, L90E, L110E, L110G, L120E, L220E
· Volvo Backhoe Loaders: BL60, BL61, BL70, BL71
· Other Equipment: A25D to A40D Articulated Haulers, G700B/G900 Series Motor Graders, and SD110 Soil Compactors.
Thank you for choosing SPARKLING MACHINERY.
Now, we’re proud to present the VOLVO EXCAVATOR PARTS MADE IN CHINA NEW BL60 BL61 EC180B L110E L120E EC210B VOE11713138 FUEL FILTER HOUSING by SPARKLING MACHINERY. Next, we’ll cover its core strengths: 6-model compatibility, secure filter installation, strict quality, pro support, and cost-effective reliability—helping you safeguard your equipment’s engine health.
The SPARKLING MACHINERY NEW VOE11713138 FUEL FILTER HOUSING Photo:



Why choose the SPARKLING NEW BL60 BL61 EC180B L110E L120E EC210B VOE11713138 Fuel Filter Housing?
-
- Precision-Machined Spin-On Threads: Ensures absolute concentricity with the replacement filter cartridge, eliminating gasket bunching and dangerous fuel weeping.
-
- Corrosion-Resistant Structural Alloy: Resists internal pitting and scaling caused by accumulated water pulled out of contaminated diesel fuel.
-
- Integrated Accessory Auxiliary Ports: Pre-drilled and tapped to accommodate factory water-in-fuel indicators, mechanical hand primers, or diagnostic bleeder screws.
-
- True Form-Fit Alignment: Matches the original center-to-center mounting bolt dimensions perfectly, allowing for a fast changeout with existing chassis hardware.
FAQ
What are the main indicators that a fuel filter housing needs to be replaced?
The most common sign is structural fluid weeping around the main mounting threads or fitting ports due to over-tightening. You may also encounter an engine that hard-starts or crank-stalls continuously because a hairline crack in the aluminum head is allowing air to be sucked straight into the fuel lines, disrupting system suction.
What causes the threads on a fuel filter housing base like the VOE11713138 to fail?
Failures are almost always caused by cross-threading or over-torquing during rapid field filter changes. If a technician forces a spin-on filter onto the housing at an angle, it easily chews up the soft aluminum threads. Additionally, over-tightening the fuel line adapter fittings can permanently crack or split the internal port shoulders.
Is any special process required after installing the new housing and filter?
Yes, you must thoroughly bleed all air trapped inside the fuel system before trying to crank the engine. Once the new housing is bolted in and the lines are tightly connected, use the integrated primer pump or bleeder screw to push raw diesel fuel through the housing until a solid stream of fuel escapes with no air bubbles. Cranking the engine dry can stress the injection pump and rapidly drain your batteries.
-
📦 Packing
1. Packaging methods: Carton box + Wooden case/Pallet + Anti-rust treatment
2. Export-standard packaging to ensure safety during transportation
3. Custom packaging available upon request
4. Dimensions and weight can be provided for freight calculation



🚚 Shipping
1. Available shipping methods: Sea freight, Air freight, Express delivery (DHL, UPS, FedEx, etc.)
2. LCL (Less than Container Load) and FCL (Full Container Load) options are supported
3. For Russian clients, we can introduce the forwarder agent to you
4. Delivery time: Ships within 1-3 working days after payment (for items in stock)
💳 Payment
1. Accepted methods: T/T, Bank Transfer, PayPal, Alipay, WeChat Pay, Western Union
2. Deposit + balance payment available for large or custom orders
3. Flexible payment options—feel free to contact us for details
📌 Frequently Asked Questions (FAQs)
Q: Which excavator models is this part compatible with?
A: This product is compatible with major brands such as CAT, KOMATSU, HITACHI, and more. Custom specifications are also available.
Q: How can I make sure I’m selecting the correct part?
A: You can send us a photo of the old part, part number, or your excavator model, and we will help you confirm the right match.
Q: Is there a warranty for this product?
A: Yes, we offer a 6-month quality guarantee under normal use.
Get a free quote
We are committed to producing the highest quality products at the most competitive prices. Therefore, we sincerely invite all interested companies to contact us for more information.




Sparkling Machinery Co.,Ltd
sparkling_machinery
Whatsapp: +8613609010879