VOE17412748 / ZGAQ-02876 Powertrain Drive Flange for Volvo EW140E, EW160E
The VOE17412748 / ZGAQ-02876 Drive Flange Assembly is a high-durability mechanical coupling flange engineered specifically for Volvo C-Series, D-Series, and E-Series wheeled excavators.
Compatible Machinery & Models
· Volvo Equipment: Commonly fits the drive axle groups of Volvo EW205D, EW210D, and EW230C wheeled excavators.
· Hyundai Equipment: Fits 9-Series wheeled excavators including R140W-9, R170W-9, and R210W-9, as well as newer HW210 models. It is also found on certain wheel loaders like the HL730-9 and HL730TM-9.
· Doosan / Develon Equipment: Compatible with specific DX210W wheeled excavators that utilize matching ZF axle lines.
Thank you for choosing SPARKLING MACHINERY.
The VOE17412748 / ZGAQ-02876 drive flange is manufactured from high-grade forged alloy steel that undergoes specialized induction hardening along its structural load points and internal splines. Built to handle the instant directional changes, heavy braking counter-torques, and rugged ground shock loads unique to rubber-tired wheeled excavators, this flange guarantees zero-slip rotational transfer. Replacing a worn, cracked, or loose flange restores dependable traction control and eliminates drivetrain backlash play.
The SPARKLING MACHINERY NEW VOE17412748/ZGAQ-02876 FLANGE Photo:



Why choose the SPARKLING NEW EW140E EW145B EW160E EW180C VOE17412748/ZGAQ-02876 Flange?
-
- Forged Alloy Steel Construction: Offers exceptional structural yield strength to prevent cracking or warping during high-load traveling or digging operations.
-
- Precision Internal Splines: Broached to exact dimensional profiles for a snug, tight-tolerance fit onto the driving shaft, preventing spline stripping under heavy torque loads.
-
- Accurate Bolt-Hole Registration: Features perfectly indexed mounting holes to ensure rapid, stress-free alignment with the companion yokes or universal joints.
-
- Corrosion-Resistant Surface Treatment: Finished with a protective industrial coating to minimize rust scaling caused by continuous exposure to mud, road salts, and moisture.
FAQ
What are the main warning signs that a wheeled excavator's drive flange is wearing out?
Common indicators include a noticeable metallic clunking or clicking sound whenever you change machine directions from forward to reverse, excessive play or a "backlash" sensation in the travel system, or severe driveline vibrations while driving down the road. Visual signs include loose mounting bolts or a reddish-brown rust powder (fretting corrosion) bleeding out from the internal splined center hub.
What happens if I continue operating the machine with a loose or worn drive flange?
It can result in extensive, costly damage to your drivetrain. Operating with a worn flange allows micro-movements between the splined shaft and the flange center. Over time, these movements will round out the sharp splines on both the flange and the much more expensive output shaft of the travel motor or axle differential. If the splines strip completely under a load, you will lose travel power entirely and risk catastrophic internal housing failures.
Should the mounting hardware be replaced when installing the new VOE17412748 flange?
Yes, it is strongly recommended to use new high-tensile mounting bolts and washers. Drive flange bolts are subjected to high cycling loads and stretching forces. Reusing old, fatigue-weakened bolts increases the risk of them shearing off under stress. When installing the new flange, clean the mating surfaces thoroughly, apply the manufacturer-specified thread-locking compound, and torque the new bolts to factory specifications using a calibrated torque wrench.
-
📦 Packing
1. Packaging methods: Carton box + Wooden case/Pallet + Anti-rust treatment
2. Export-standard packaging to ensure safety during transportation
3. Custom packaging available upon request
4. Dimensions and weight can be provided for freight calculation



🚚 Shipping
1. Available shipping methods: Sea freight, Air freight, Express delivery (DHL, UPS, FedEx, etc.)
2. LCL (Less than Container Load) and FCL (Full Container Load) options are supported
3. For Russian clients, we can introduce the forwarder agent to you
4. Delivery time: Ships within 1-3 working days after payment (for items in stock)
💳 Payment
1. Accepted methods: T/T, Bank Transfer, PayPal, Alipay, WeChat Pay, Western Union
2. Deposit + balance payment available for large or custom orders
3. Flexible payment options—feel free to contact us for details
📌 Frequently Asked Questions (FAQs)
Q: Which excavator models is this part compatible with?
A: This product is compatible with major brands such as CAT, KOMATSU, HITACHI, and more. Custom specifications are also available.
Q: How can I make sure I’m selecting the correct part?
A: You can send us a photo of the old part, part number, or your excavator model, and we will help you confirm the right match.
Q: Is there a warranty for this product?
A: Yes, we offer a 6-month quality guarantee under normal use.
Get a free quote
We are committed to producing the highest quality products at the most competitive prices. Therefore, we sincerely invite all interested companies to contact us for more information.




Sparkling Machinery Co.,Ltd
sparkling_machinery
Whatsapp: +8613609010879