ranroswang@hksparkling.com 
+86 138 2341 8469
Top Specs: YN52S00102P1 Low Pressure Sensor for SK250-6E/8
- Top Specs: YN52S00102P1 Low Pressure Sensor for SK250-6E/8
- Overview: What the YN52S00102P1 Low Pressure Sensor Is and Why It Matters
- Key Specs: Technical Features of the YN52S00102P1 and Related Models
- Compatibility: Which Excavator Models Use This Low Pressure Sensor
- Why Choose a 3MPa Low Pressure Sensor: Safety and Operational Benefits
- Installation Best Practices for Low Pressure Sensor Replacement
- Troubleshooting: Common Faults and Diagnostic Steps
- Comparative Table: LC52S00019P1 vs YN52S00102P1 vs YW52S00002P1 vs LS52S00013F1
- Performance and Durability: Materials and Build Considerations
- How to Verify Genuine Parts and Avoid Counterfeits
- Maintenance Schedule: Proactive Checks to Extend Sensor Life
- Purchasing Guide: What Buyers Should Ask
- Cost vs. Value: Investing in the Right Low Pressure Sensor
- Brand Advantage: Why Choose SPARKLING Sensors for Excavator Hydraulic Safety
- Real-World Use Cases: Fleet Examples and Outcomes
- FAQ: Common Questions About YN52S00102P1 and Related Low Pressure Sensors
- Q: Is the YN52S00102P1 the same as LC52S00019P1?
- Q: Can I install this sensor without professional help?
- Q: How long do these pressure sensors typically last?
- Q: Will a sensor failure damage my excavator?
- Q: How do I test a low pressure sensor?
- Contact Sales / View Product: Get Genuine YN52S00102P1 Low Pressure Sensors
- Authoritative References and Further Reading
- Closing Note
Top Specs: YN52S00102P1 Low Pressure Sensor for SK250-6E/8
Overview: What the YN52S00102P1 Low Pressure Sensor Is and Why It Matters
The YN52S00102P1 low pressure sensor is an electronic hydraulic sensor rated for 3MPa, designed to detect hydraulic pressure drop and provide reliable switch control for excavators and heavy machinery. It belongs to a family of SPARKLING sensors — including LC52S00019P1, YW52S00002P1, and LS52S00013F1 — engineered to optimize system safety, reduce downtime, and protect hydraulic components by alerting operators or triggering shutdowns when pressure falls below safe thresholds.
Key Specs: Technical Features of the YN52S00102P1 and Related Models
Understanding the core specifications helps maintenance teams and purchasers verify fit and function. The YN52S00102P1 and its sister parts share common features tailored for Kobelco SK-series and select New Holland excavators: a 3MPa pressure trigger point, electronic switch output for ECU or alarm circuits, robust hydraulic-rated housing, and industry-grade connectors designed to withstand vibration, dust, and oil exposure.
Compatibility: Which Excavator Models Use This Low Pressure Sensor
Compatibility is a primary for buyers searching for replacement parts. The 3Mpa low pressure sensor models LC52S00019P1, YN52S00102P1, YW52S00002P1 and LS52S00013F1 are compatible across a broad range of Kobelco excavators — including SK130-8, SK140LC-8, SK200-6/6E/8, SK210-6E/8/9, SK230-6E, SK250-6E/8, SK260-8/9, SK330-6E/8, SK350-8/9, SK460-8, and SK480-8 — and select New Holland models such as E70, E135, E175, E215, and E235. Always confirm part numbers against your machine's serial plate and service manual before purchase.
Why Choose a 3MPa Low Pressure Sensor: Safety and Operational Benefits
Hydraulic systems depend on correct pressure levels. A low pressure sensor set at 3MPa (approx. 435 psi) protects hydraulic pumps, actuators, and control valves by providing early warnings or initiating automatic protective actions. For operations managers, installing a correctly specified low pressure sensor reduces catastrophic failures, lowers repair costs, and improves uptime by enabling preventive interventions.
Installation Best Practices for Low Pressure Sensor Replacement
Proper installation extends sensor life and ensures reliable readings. Key steps include: isolating hydraulic circuits and relieving pressure before removal; cleaning the mounting port to remove debris; using the correct torque for the sensor thread to avoid leaks or housing damage; confirming electrical connector sealing and pin alignment; and performing a system pressure test after installation. Always consult the equipment service manual for torque values and wiring diagrams.
Troubleshooting: Common Faults and Diagnostic Steps
Problems commonly reported with low pressure sensors include false low-pressure alarms, intermittent signals, and no signal at all. Troubleshooting steps: verify electrical continuity and voltage at the connector, inspect the harness for abrasion or water ingress, check for hydraulic leaks or air in the system that can cause pressure drops, and substitute with a known-good sensor to isolate the fault. Logging the ECU error codes (if available) helps pinpoint if the issue is sensor-related or hydraulic-system related.
Comparative Table: LC52S00019P1 vs YN52S00102P1 vs YW52S00002P1 vs LS52S00013F1
| Part Number | Type | Pressure Rating | Primary Application | Connector / Output |
|---|---|---|---|---|
| LC52S00019P1 | Electronic hydraulic low-pressure sensor | 3MPa | Kobelco & New Holland excavators | Standard sealed connector / switch output |
| YN52S00102P1 | Electronic hydraulic low-pressure sensor | 3MPa | SK200-6/6E/8, SK250-6E/8, SK460-8, SK480-8 | Sealed electrical connector / ECU-compatible |
| YW52S00002P1 | Low-pressure sensing switch | 3MPa | Wide Kobelco model coverage | Sealed switch output |
| LS52S00013F1 | Hydraulic pressure switch | 3MPa | OEM replacement for late-model excavators | Sealed connector / harness-ready |
Performance and Durability: Materials and Build Considerations
Sensors used in heavy equipment must survive severe environments: thermal cycles, vibration, oil contamination, and mechanical shocks. The YN52S00102P1 and equivalent models typically use corrosion-resistant housings (steel or stainless components with protective coatings), high-grade elastomer seals, and vibration-rated electronic internals. Choosing genuine or OEM-equivalent parts reduces premature failures caused by substandard materials.
How to Verify Genuine Parts and Avoid Counterfeits
Counterfeit parts can mimic appearance but fail under load. To verify authenticity: compare the part number and serial/lot markings with OEM catalogs, purchase from authorized distributors or trusted suppliers, inspect packaging and labeling for OEM logos and quality seals, and request manufacturer certificates when buying in bulk. If unsure, consult the equipment dealer or the OEM parts department for cross-reference checks.
Maintenance Schedule: Proactive Checks to Extend Sensor Life
Integrate low pressure sensor checks into routine hydraulic maintenance: inspect harnesses and connectors every 250 hours, verify sensor mounting and thread sealing during major inspections, and perform functional checks (simulate low pressure or observe sensor output during startup) every 500 hours or per manufacturer's recommendation. Timely replacement of worn harnesses and O-rings prevents ingress and electrical faults.
Purchasing Guide: What Buyers Should Ask
When procuring a YN52S00102P1 or equivalent low pressure sensor, buyers should confirm: exact part number compatibility with machine serial number; pressure rating (3MPa); connector pinout and wiring harness compatibility; warranty terms and return policy; availability of technical support; and whether the vendor provides installation guidance or calibration services. Clear answers to these points reduce installation errors and return costs.
Cost vs. Value: Investing in the Right Low Pressure Sensor
Price is only one factor; value includes longevity, fitment accuracy, and after-sales support. Cheaper sensors may save upfront cost but lead to increased downtime and labor costs if they fail prematurely. Genuine or OEM-equivalent sensors like YN52S00102P1 typically come with verification, warranty, and technical documentation that justify the investment for fleet operators.
Brand Advantage: Why Choose SPARKLING Sensors for Excavator Hydraulic Safety
SPARKLING-branded sensors (LC52S00019P1, YN52S00102P1, YW52S00002P1, LS52S00013F1) emphasize rigorous testing, cross-compatibility with Kobelco/New Holland models, and durable designs suited for field conditions. For maintenance teams, this means reduced parts churn, consistent sensor behavior across fleet models, and vendor support for troubleshooting. The brand’s focus on fit, finish, and functional parity with OEM parts makes it a practical choice for both single-machine owners and large-scale rental fleets.
Real-World Use Cases: Fleet Examples and Outcomes
Construction fleets that standardized on 3MPa low pressure sensors for their Kobelco machines reported fewer hydraulic pump seizures and earlier detection of leaking control valves, which allowed maintenance teams to schedule repairs proactively rather than react to catastrophic failures. These operational improvements translate to measurable reductions in downtime and repair costs over annual maintenance cycles.
FAQ: Common Questions About YN52S00102P1 and Related Low Pressure Sensors
Q: Is the YN52S00102P1 the same as LC52S00019P1?
A: Functionally they are equivalent 3MPa low pressure sensors used in similar Kobelco and New Holland models, but confirm the exact part number against your machine’s serial number to ensure connector and mounting compatibility.
Q: Can I install this sensor without professional help?
A: Basic mechanical installation can be done by a qualified technician. However, because hydraulic and electrical safety are involved, follow the service manual precisely or have an experienced technician perform the replacement.
Q: How long do these pressure sensors typically last?
A: Lifespan depends on operating environment. Under normal conditions with regular maintenance, expect multiple years of service. Harsh environments with heavy vibration, contamination, or poor electrical protection can shorten service life.
Q: Will a sensor failure damage my excavator?
A: A correctly functioning low pressure sensor prevents damage by warning or shutting down systems during low-pressure events. If it fails silently (no output), it may mask developing hydraulic failures; this is why scheduled checks and genuine parts are important.
Q: How do I test a low pressure sensor?
A: Use a multimeter to confirm the electrical switch output at the connector and perform a hydraulic pressure test to validate the sensor switches at approximately 3MPa. Always follow safety procedures when working on pressurized systems.
Contact Sales / View Product: Get Genuine YN52S00102P1 Low Pressure Sensors
For pricing, lead times, and compatibility confirmation, contact our sales team or request a parts quote. We can cross-reference your machine serial number, provide OEM-equivalent options (LC52S00019P1, YW52S00002P1, LS52S00013F1), and assist with technical guidance to ensure correct installation and performance.
Authoritative References and Further Reading
- Pressure sensor — Wikipedia: https://en.wikipedia.org/wiki/Pressure_sensor
- Hydraulics — Wikipedia: https://en.wikipedia.org/wiki/Hydraulics
- Kobelco Construction Machinery — Global: https://global.kobelco-cm.com
- New Holland Construction — Official: https://www.newholland.com
- Engineering Toolbox — Pressure Sensors Overview: https://www.engineeringtoolbox.com/pressure-sensors-d_1247.
- ISO — Quality management systems (ISO 9001): https://www.iso.org/iso-9001-quality-management.
Closing Note
Selecting the correct low pressure sensor — such as the YN52S00102P1 (3MPa) or its counterparts LC52S00019P1, YW52S00002P1, LS52S00013F1 — is essential for safeguarding hydraulic systems in Kobelco and compatible New Holland excavators. Prioritize genuine or OEM-equivalent parts, follow installation best practices, and adopt a scheduled maintenance plan to maximize uptime and protect your investment.
Common Hydraulic System Issues in Excavators and Their Solutions
Testing Protocols for SK460-8 SK480-8 Low Pressure Sensors
Wholesale excavator R140W-7 spare parts manufacturer and supplier
Hyundai Excavator Parts: What Makes Quality Parts Stand Out
faq
How do you ensure the quality of your parts?
We follow strict quality control procedures throughout the manufacturing process. Our parts are tested for durability, performance, and precision to ensure they meet industry standards and exceed customer expectations.
Can I get technical support for installing your parts?
Absolutely. We provide technical support and guidance for the installation and maintenance of our parts. Our team is available to assist you with any questions or concerns to ensure proper installation and optimal performance.
Are your products covered by a warranty?
-
Yes, all of our excavator parts come with a warranty to ensure quality and reliability. The warranty period may vary depending on the type of part. Please contact us for detailed warranty terms for specific products.
-
Do you offer customized parts?
-
Yes, we offer tailored solutions to meet specific customer requirements. Whether you need custom dimensions or specialized features, we can design and produce parts that perfectly match your excavator’s needs.
-
What is the lead time for receiving excavator parts?
Our typical lead time depends on the complexity and quantity of the order. For standard parts, delivery usually takes between 7 to 14 days. For custom orders, the lead time may vary, but we always strive to ensure timely delivery.
SK200-6/6E/8 SK250-6E/8 SK460-8 SK480-8 LC52S00019P1 YN52S00102P1 YW52S00002P1 LS52S00013F1 3Mpa Low Pressure Sensor
The SPARKLING SK200-6/6E/8, SK250-6E/8, SK460-8, SK480-8 Low Pressure Sensor (3Mpa) models LC52S00019P1, YN52S00102P1, YW52S00002P1, LS52S00013F1 ensure precise switch control. Designed for reliable low pressure sensing, these sensors optimize performance and durability in industrial applications.
Part number LC52S00019P1 refers to an electronic hydraulic low-pressure sensor used primarily in heavy machinery such as excavators. It is designed to monitor hydraulic pressure conditions to ensure system safety, triggering alerts or shutdowns if pressure falls below safe thresholds.
Applications
The sensor is compatible with a wide range of Kobelco and some New Holland excavators, including:
Kobelco SK Series: SK130-8, SK140LC-8, SK200-6/6E/8, SK210-6E/8/9, SK230-6E, SK250-6E/8, SK260-8/9, SK330-6E/8, SK350-8/9, SK460-8, and SK480-8.
New Holland Models: E70, E135, E175, E215, and E235.
Thermostat Used For Volvo Construction Equipment EC140D EC220D EW180D EWR150E VOE21773551 21773551
Maintain the perfect operating temperature for your Volvo engine with the VOE21773551 Thermostat, proudly supplied by SPARKLING MACHINERY. This high-precision cooling system component is vital for preventing engine overheating and ensuring optimal fuel combustion.
Designed for the latest generation of Volvo machinery, our 21773551 thermostat features a precise opening temperature (83°C) to protect your engine under heavy loads. Whether you are operating an EC220E in extreme heat or an EWR150E in urban construction, SPARKLING MACHINERY provides the reliability you need to avoid costly engine repairs.
Key Features:
OEM Specification: Fully compatible with Volvo part numbers VOE21773551 and 21773551.
Optimal Temperature Regulation: Prevents engine wear by maintaining stable thermal conditions.
Wide Compatibility: Fits a vast range of D-series and E-series Volvo equipment.
Compatible Models:
Excavators: EC140D, EC160D, EC180D, EC220D, EC220E, EC235D, EC235E.
Wheeled Excavators: EW140D, EW160D, EW180D, EW210D, EWR150E.
Wheel Loaders: L45G/H, L50G/H, L60G/H, L70G/H, L90G/H.
Road Equipment: SD115/SD135 Soil Compactors and P4820D/P6820D Pavers
Hydraulic Hose For Volvo Construction Equipment models EC480D EC480DHR VOE14578951 14578951
Ensure peak hydraulic efficiency for your heavy-duty fleet with the VOE14578951 Hydraulic Hose, exclusively supplied by SPARKLING MACHINERY. This premium hose is specifically engineered for high-pressure applications in Volvo’s large-scale excavators and pipelayers.
Fabricated from multi-layered reinforced synthetic rubber, our VOE14578951 hose is built to withstand extreme pressure fluctuations and abrasive environments. Whether your EC480D is working in a quarry or your EC480DHR is engaged in high-reach demolition, this hose ensures zero-leakage performance and long-term reliability.
Key Specifications:
OEM Part Number: VOE14578951 / 14578951.
Enhanced Durability: Resistant to oil, weather, and high-impulse hydraulic cycles.
Exact Fitment: Designed as a direct replacement for Volvo EC480D series, ensuring easy installation.
High Pressure Rated: Engineered for the demanding hydraulic demands of 50-ton class machinery.
Supported Equipment:
Excavators: EC480D, EC480DHR (High Reach Demolition).
Pipelayers: PL4809D.
VOE14550607 Limit Switch for Volvo Construction Equipment EC55B EC140CL EC210B/C
Upgrade your Volvo heavy machinery with the high-precision VOE14550607 Limit Switch, supplied by SPARKLING MACHINERY. This genuine-quality electrical component is essential for ensuring the safety and operational accuracy of your equipment's hydraulic and mechanical systems.
Engineered to withstand the harshest job site conditions, our VOE14550607 switch provides reliable signal feedback for safety locks, boom positioning, and cabin controls. At SPARKLING MACHINERY, we prioritize durability and seamless compatibility to minimize downtime and maximize your fleet's productivity.
Key Features:
Precision Performance: Accurate switching for safety-critical functions.
Heavy-Duty Build: Designed for high-vibration and extreme temperature environments.
Plug-and-Play Compatibility: Direct replacement for Volvo OEM part VOE14550607.
Broad Application: Fits a wide range of Volvo Excavators and Wheel Loaders.
Compatible Models:
Excavators: EC55B, EC140B/C, EC160B/C, EC210B/C, EC240B, EC290B, EC360B, EC460B, ECR145C.
Wheel Loaders: L60F, L70F, L90F, L110F, L120F.
Other: Backhoe loaders and Articulated haulers.
Contact us
Email: ranroswang@hksparkling.com
Wechat: +86 136 0901 0879
Skype: foreverlucia1
WhatsApp: +86 136 0901 0879
Address: No. 514-515, Hulin Road, Tianhe District, Guangzhou, China.
Sparkling Machinery Co.,Ltd
foreverlucia1