ranroswang@hksparkling.com 
+86 138 2341 8469
YY10V00001F3 Hydraulic Main Pump for Kobelco SK135SR / New Holland E130 — Reliable Replacement for Excavator Hydraulics
- How to confirm if YY10V00001F3 is compatible with my excavator?
- How do I verify model fit for Kobelco SK135SR or SK135SRLC?
- How can I confirm compatibility with New Holland E130/EH130?
- What documents or photos should I send to validate the replacement?
- Why choose an aftermarket ZZ10V00001F3 hydraulic main pump over an OEM unit?
- Why is durability important for excavator main pumps?
- How does cost-effectiveness compare between aftermarket and OEM pumps?
- What quality checks should I expect from a reputable aftermarket supplier?
- How to install, maintain, and troubleshoot the YY10V00001F3 pump?
- How should I prepare for pump installation to avoid damage?
- What are the routine maintenance steps to extend pump life?
- How can I quickly diagnose common pump issues in the field?
- What performance benefits and warranty terms should I expect?
- What operational improvements does a properly functioning main pump provide?
- How long is the typical warranty and what does it cover?
- How do industry standards support pump reliability claims?
- Selected engineering references
- FAQ
YY10V00001F3 hydraulic main pump is a high-quality, direct-fit replacement designed to restore hydraulic performance in Kobelco SK135SR, SK135SRLC and New Holland E130/EH130 excavators. This aftermarket axial piston main pump focuses on stable flow, accurate pressure response, and extended service life—critical for digging efficiency, cycle times, and fuel economy. For field-proven principles behind pump design and hydraulic power, see the authoritative discussion on hydraulic pump design and types and hydraulic system fundamentals.
How to confirm if YY10V00001F3 is compatible with my excavator?
How do I verify model fit for Kobelco SK135SR or SK135SRLC?
Check your excavator’s serial plate and OEM part cross-reference: the YY10V00001F3 is specified as a replacement for unit types used in Kobelco SK135SR/SRLC families; match the pump flange, shaft spline count, and mounting bolt pattern to confirm fit. If unsure, provide your engine frame and chassis numbers to the supplier for verification.
How can I confirm compatibility with New Holland E130/EH130?
Inspect the OEM pump number and hydraulic schematic: many E130/EH130 units share main pump footprints with Kobelco lineage—confirm the mounting pattern, control valve linkages, and pressure port orientation before ordering. Sending a photo of the old pump accelerates accurate match.
What documents or photos should I send to validate the replacement?
Provide clear images of the pump nameplate, shaft end (spline), mounting face, and the machine model plate. Also include the OEM code (YY10V00001F3) when contacting suppliers to expedite cross-referencing and avoid ordering errors.
Why choose an aftermarket ZZ10V00001F3 hydraulic main pump over an OEM unit?
Why is durability important for excavator main pumps?
Durability reduces downtime and repair frequency: a robust main pump withstands pressure spikes and contamination, reducing the risk of catastrophic failure. Quality aftermarket pumps use hardened components and precision machining to match OEM tolerances and deliver multi-season field reliability.
How does cost-effectiveness compare between aftermarket and OEM pumps?
Aftermarket pumps like YY10V00001F3 typically offer 20–40% lower acquisition cost versus some OEM lists while maintaining comparable performance when produced under strict quality control. The total cost of ownership falls further with reduced downtime and available rebuild kits.
What quality checks should I expect from a reputable aftermarket supplier?
Look for dynamic testing (flow/pressure curve verification), ISO-aligned manufacturing controls, and traceable material certifications. SPARKLING MACHINERY emphasizes precision inspection and test-bench validation to ensure each pump meets required operational parameters.
How to install, maintain, and troubleshoot the YY10V00001F3 pump?
How should I prepare for pump installation to avoid damage?
Flush the hydraulic circuit and replace filters before installation to eliminate debris; use correct torque settings for mounting bolts and ensure proper shaft alignment. Contamination control is crucial—reference hydraulic cleanliness best practices for guidance.
What are the routine maintenance steps to extend pump life?
Perform oil condition checks and change hydraulic fluid per machine manufacturer guidance (commonly every 500–1,000 operating hours depending on conditions), replace return-line filters regularly, and monitor temperature and unusual noise for early signs of wear.
How can I quickly diagnose common pump issues in the field?
Low flow or weak boom movement often indicates internal wear or control valve issues; increased noise and heat suggest cavitation or aeration. Use pressure gauges to compare actual system pressure against expected values and inspect suction lines for leaks or restrictions.
What performance benefits and warranty terms should I expect?
What operational improvements does a properly functioning main pump provide?
Consistent flow and precise pressure control translate to faster cycle times, stable attachments operation, and improved fuel efficiency. Restoring correct pump performance often reduces hydraulic overheating and improves attachment responsiveness.
How long is the typical warranty and what does it cover?
Warranty periods vary by supplier; reputable aftermarket suppliers commonly offer 6–12 months limited warranty covering manufacturing defects and functional failures under normal use. Confirm warranty conditions, return procedures, and whether rebuild or replacement is covered before purchase.
How do industry standards support pump reliability claims?
Design and test methods are discussed in technical literature; consult practical explanations of pump principles and testing approaches at the hydraulic pump overview on Wikipedia and manufacturer technical resources that explain test-bench validation.
SPARKLING MACHINERY, founded in 2013, specializes in excavator parts including hydraulic components, undercarriage systems and electrical parts. We emphasize stability, precision and perseverance—offering tailored technical support, strict quality control, and competitive pricing to help reduce customer costs. For the YY10V00001F3 hydraulic main pump product page and ordering options, view the product listing at YY10V00001F3 hydraulic main pump for Kobelco SK135SR.
Selected engineering references
- Detailed overview of hydraulic pump types and operation
- Hydraulic system fundamentals and contamination concerns
- Kobelco Construction Machinery background and model families
FAQ
What models does YY10V00001F3 fit?
It fits Kobelco SK135SR, SK135SRLC and New Holland E130/EH130 models when mounting and shaft specifications match. Always verify by cross-referencing the OEM code and photos before purchase.
How do I know if my pump needs replacement?
If you experience persistent low flow, excessive noise, or pressure drop under load, replacement is likely needed. These symptoms usually indicate internal wear or control failure that repair may not reliably fix.
Can I rebuild the YY10V00001F3 pump onsite?
Yes, many components are serviceable with a rebuild kit, but rebuild requires precision tools and test-bench calibration; for best results, use an experienced hydraulic shop or the supplier’s technical service.
How often should hydraulic oil be changed for machines using this pump?
Change intervals commonly range from 500 to 1,000 operating hours depending on operating conditions and fluid type. Regular oil analysis helps optimize service intervals and extend pump life.
Is the YY10V00001F3 an OEM part number?
YY10V00001F3 is the aftermarket reference used by suppliers for this replacement pump; confirm cross-reference with your OEM part number to ensure an exact fit.
What should I provide to get a fast quote and technical support?
Provide the excavator model, serial number, pump nameplate photo, and OEM part code (e.g., YY10V00001F3). This information enables accurate quoting and fit confirmation within one business day in most cases.
For personalized fitment, pricing, and shipping details contact SPARKLING MACHINERY: ranroswang@hksparkling.com — our team provides expert consultation and replacement solutions.
Packaging Inspection: Preventing Damage to Pulley Idlers
Supplier Vetting Checklist for Wheel Loader Idler Purchases
Excavator Attachment Types and Compatibility Guide
The Impact of Quality Hydraulic Parts on Excavator Performance
faq
How do you ensure the quality of your parts?
We follow strict quality control procedures throughout the manufacturing process. Our parts are tested for durability, performance, and precision to ensure they meet industry standards and exceed customer expectations.
What is the lead time for receiving excavator parts?
Our typical lead time depends on the complexity and quantity of the order. For standard parts, delivery usually takes between 7 to 14 days. For custom orders, the lead time may vary, but we always strive to ensure timely delivery.
Do you offer customized parts?
-
Yes, we offer tailored solutions to meet specific customer requirements. Whether you need custom dimensions or specialized features, we can design and produce parts that perfectly match your excavator’s needs.
-
Are your products covered by a warranty?
-
Yes, all of our excavator parts come with a warranty to ensure quality and reliability. The warranty period may vary depending on the type of part. Please contact us for detailed warranty terms for specific products.
-
Can I get technical support for installing your parts?
Absolutely. We provide technical support and guidance for the installation and maintenance of our parts. Our team is available to assist you with any questions or concerns to ensure proper installation and optimal performance.
DEUTZ TCD2015V08 Diesel Engine | 15.9L V8 Turbocharged Industrial Motor
The DEUTZ TCD2015V08 represents the pinnacle of DEUTZ’s large-engine technology for mobile machinery. The V8 architecture provides a significant power advantage while maintaining a shorter longitudinal profile compared to inline engines of similar displacement.
Equipped with the EMR (Electronic Motor Regulator) and a high-pressure injection system, the TCD2015V08 delivers lightning-fast load response and immense torque. It is specifically designed to withstand the structural stresses of 24-hour mining and heavy earthmoving operations.
DEUTZ TCD2013V06 Diesel Engine | 11.9L V6 Turbocharged Industrial Motor
The DEUTZ TCD2015V06 is a powerhouse in the 12-liter class. Its V6 design allows for a significantly shorter engine length compared to inline engines, making it an excellent fit for machines with tight engine compartments. Utilizing the DEUTZ Multi-Parallel Injection system (MVS) and electronic engine control (EMR), it provides a perfect balance of high torque and low fuel consumption.
Built to meet Tier 3 / Stage IIIA emission standards, the TCD2015V06 is renowned for its reliability in extreme conditions, featuring individual cylinder heads and a robust crankcase designed for high-hour duty cycles.
Volvo D8K Diesel Engine | 7.7L 6-Cylinder Euro VI Industrial & Truck Motor
The Volvo D8K is the heart of Volvo’s modern medium-duty range. By increasing displacement to 7.7 liters, Volvo has achieved a engine that is both more powerful and more fuel-efficient than its predecessors.
The standout feature of the D8K is its Variable Geometry Turbocharger (VGT), which provides instant throttle response and high torque across a very wide rev range. This makes it the ideal power plant for urban distribution trucks (Volvo FE/FL), buses, and high-production construction machinery that requires constant power without high fuel consumption.
DEUTZ TCD2013L064V Diesel Engine | 7.15L 6-Cylinder 4-Valve Common Rail Motor
The DEUTZ TCD2013L064V is a water-cooled, inline engine that combines mechanical durability with sophisticated electronic control. The integration of the 4-valve technology allows for a more centered injector position, leading to optimized combustion and higher peak torque.
This engine is a power-density leader in the 7-liter class, making it ideal for large excavators, mobile cranes, and agricultural harvesters that require a compact yet incredibly powerful prime mover.
Contact us
Email: ranroswang@hksparkling.com
Wechat: +86 136 0901 0879
Skype: foreverlucia1
WhatsApp: +86 136 0901 0879
Address: No. 514-515, Hulin Road, Tianhe District, Guangzhou, China.
Sparkling Machinery Co.,Ltd
sparkling_machinery
Whatsapp: +8613609010879